Troubleshooting - Advanta M98 Manual De Uso Y Mantenimiento

14

TROUBLESHOOTING

In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
center.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly by unauthorized personnel.
In these cases the warranty does not apply.
Problem
The appliance does not
start.
The result of blending is
unsatisfactory.
The appliance vibrates in an
unusual way.
Make sure it is plugged in.
•
Make sure the safety circuit breaker is closed.
•
Make sure the cup is hung correctly to the cup holder.
•
Make sure the switch on the appliance is turned to ON.
•
If the problem occurs after a long period of intensive use the
•
motor may have overheated. Wait at least 20 minutes and
try again. If you put the appliance in a cool place this will
reduce the waiting time.
If the problem occurs after an overload, the circuit breaker
•
on the motor may have been tripped! Push the button on the
back or bottom of the appliance (not standard equipment on
all models).
Make sure the agitator is intact and tightly fastened.
•
Make sure the motor rotates properly.
•
NOTE: Take account of the fact that many factors may affect
the result such as the type and temperature of the
ingredients used.
Make sure the agitator is intact and in the correct position. If •
the agitator appears off center, unscrew it and screw it
correctly into place.
Solution
GB