Idiomas disponibles
Idiomas disponibles
7.2. Candle Type Halogen Bulb
• Bulb does not operate is possible to remove as shown in. (Figure 15)
• A new bulb with the same features is replaced with removed bulb.
• Remove the holder on the LED bulb. Put the new LED bulb on the
holder housing of the LED bulb you removed as shown in Figure 16.
Figure 15
8. MAINTENANCE OF THE CHIMNEY HOOD
• Device should be unplugged or switch should be turned off before
cleaning and maintenance procedures.
• Metal filter should be cleaned once a month with hot soapy water or
in the dishwasher, if possible. (60 °C)
• Remove the aluminum cartridge filter by pressing on the spring
catches on the side. Do not refit before drying after wash.
• Outer surface of the extractor hood should be wiped with a damp
cloth soaked with soapy water.
• Make sure electronic parts do not contact with water or similar materials.
• For inox products, using inox cleaning and maintenance products
available in the market will provide longer usage life for your device.
• Aluminum filters can be washed in dishwasher. After several washes,
aluminum filters may change colour. This is normal and filters do not
need to be replaced.
WARNING: When used with devices which use fuel (heaters working with
gas, diesel fuel, coal or firewood, water heaters, etc) and the air in the
environment; should be used cautiously. The chimney hood sending the
air out in the environment may affect the burning adversely.
This warning is not applicable to non-ducted use.
GB
Figure 16
13
