Cleaning And Maintenance - FONRI SMART PET FEEDER Guia Del Usuario

EN

Cleaning and Maintenance

After the feeder has been used for a period of time, the bowl and the bucket
should be cleaned with a cleaning agent to avoid the occurrence of bacteria
that affect the health of the pet due to the long time left by the food residue.
1- The upper showed machine parts can be removed from the main feeder and
cleaned with detergent and water.
2-
Open the desiccant box in the top cover.
3-
Grain barrel dissembled by turning the grain drum separation switch.
4- pull up to remove the food bowl.
5- After cleaning, it should be dried or air-dried before being installed on the
main body.
This device is suitable for dry foods smaller than 12 mm. Freezedried food is
not available. Please keep the environment dry.
Attentions
- Please place the device correctly; prevent the pet from tipping over the device. This device is only suitable for
small and medium pets under 20kg.
- Please replace the desiccant in the storage lid regularly.
- Please keep the food bucket dry and sealed.
Precautions
- Do not drop other substances than pet dry food into the grain bin. Otherwise, the device may be used
abnormally or even cause pet safety problems.
- To prevent the pet from falling over the product, it is recommended to place the corner or against the wall.
- The product power cable should be installed as concealed as possible to prevent the equipment from being
damaged by the pet biting the cable.
- If children are using this device, be sure to use it under adult guidance.
- After installing the spare dry battery, you can manually operate the device to provide normal power supply
during power failure.
- Regularly clean the food bucket and food bowl.
- This device is not recommended for young pets within three months.
6
Top cover
Desiccant box
Automatic feeding device
Grain drum separation switch
Food bowl