Genie DPS20 Instrucciones De Uso página 11

Selecting Weight Unit
Press the corresponding "UNIT" key to convert the unit between g/kg/oz/lb/ml/fl'oz.
Using the tare mode:
1. Switch on the scale as described above.
2. The LCD display will show "0g / 0.0oz".
3. Place the object to be weighed on the glass plate. The weight is displayed.
4. Now press the "OFF/TARE" key again. The weight is deleted, and the scale now
displays the zero value "0g / 0.0oz" again.
5. Now place the next object on the scale to determine its value.
Note: After removing all objects from the scale, a negative value is displayed. Press
"OFF/TARE" again to delete the value.
Overload
If the weight of the added objects exceeds the maximum loading capacity of the
scale of 705.479 oz or 20kg, the display will show "EEE". Immediately remove the
weight from the glass plate of the scale to avoid damage to the device.
Power Off
1. The scale can be switched off manually by pressing and holding the "OFF/TARE"
key for at least 2 seconds.
2. When not in use, the scale will automatically turn off after approximately 1
minute.
Maintenance
Clean with a soft cloth. Do not immerse directly into water or detergent, scrub with
abrasive material or use corrosive cleanser.
Technical Specifications
Maximum Capacity: 20kg bzw. 705,479 oz
Graduation: 5g bzw. 0,176 oz
Operating Temperature: 0°C ~ +40°C
Power Source: 2x1,5V R03 AAA
Warranty
Dear customer,
We are delighted that you have chosen this equipment.
In the case of a defect, please return the device together with the receipt and
original packing material to the point of sale.
11