Oceanic OCEATE2S Manual De Usuario página 30

Idiomas disponibles
  • ES

Idiomas disponibles

5. CLEANING AND
MAINTENANCE
5.1 cleAning
WARNING: Switch off the appliance
and allow it to cool before cleaning is
to be carried out.
General Instructions
Check whether the cleaning materials
are appropriate and recommended by
the manufacturer before use on your
appliance.
Use cream cleaners or liquid cleaners
which do not contain particles. Do not
use caustic (corrosive) creams, abrasive
cleaning powders, rough wire wool or
hard tools as they may damage the
cooker surfaces.
Do not use cleaners that contain
particles, as they may scratch the
glass, enamelled and/or painted parts
of your appliance.
Should any liquids overflow, clean them
immediately to avoid parts becoming
damaged.
Do not use steam cleaners for
cleaning any part of the appliance.
Cleaning the Hotplate Heater
Clean the hotplate heater on a regular
basis.
Wipe the hotplate with a soft cloth
soaked in only water. Then, run the
hotplate for a short time to dry it
completely.
Cleaning the Enamelled Parts (if
available)
Clean the enamelled parts of your
appliance on a regular basis.
Wipe the enamelled parts with a soft
cloth soaked in soapy water. Then, wipe
them over again with a wet cloth and dry
them.
Do not clean the enamelled parts while
they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt,
water, lemon or tomato juice on the
enamel for a long time.
Cleaning the Stainless Steel Parts (if
available)
Clean the stainless steel parts of your
appliance on a regular basis.
Wipe the stainless steel parts with a soft
cloth soaked in only water. Then, dry
them thoroughly with a dry cloth.
Do not clean the stainless steel parts
while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt,
water, lemon or tomato juice on the
stainless steel for a long time.
EN - 14
loading