Nilo TARGET BEAUTY 8133 Manual De Empleo página 21

DESCRIPTION
1 FIXED CHASSIS
The fixed chassis, shown by position 1, is made of painted iron and represents the fixed
base of the electric armchair. Inside it there are 2 electric actuators (24 volts) to manage the
movements of height adjustment and pivoting of the seat along with the central switch panel
that feeds the three actuators
2 MOBILE BACK
The back is a mobile structure of the electric armchair indicated by position 2 and is made of
foam-rubber coverei with synthetic leather (sky). Underneath it is place the electric actuator
(24 volts) the manages the movements of the back
3 ADJUSTABLE SEAT
The seat is the mobile part of the electric armchair indicated by position 3 and is made of
foam-rubber covered with synthetic leather (sky)
4 FEET MOBILE PART
The feet part is the mobile section of the electric armchair indicated by position 4 and is made
of foam-rubber covered with synthetic leather(sky)
5 RECLINABLE ARMS
Reclinable arms are the mobile section of the electric armchair indicated by position 5 and
are made of foam-rubber covered with synthetic leather (sky)
6 MOBILE HEAD REST
The head rest is the section of the electric armchair indicate by position 6 and is made of
foam-rubber covered with synthetic leather (sky)
7 KEYBOARD
The keayboard, indicated by position 7, is integrated into the motoring system.
It allows the management of movements of the back, the feet part, the pivoting and lifting or
lowering of the armchair seat.
N.B. The electric actuators( n. 3/4 at 24 volts) are fed by a double insulation switchboard
20