7. Remove the plug from the wall socket.
8. After each use, make sure that the water tank is empty.
Caution: Do not steam ironing synthetic fabrics, nylon, synthetic silk or silk fabrics.
Steam can ruin the texture of the fabric.
BURST OF STEAM
This function will be able to provide more steam to remove stubborn creases.
1. Set the thermostat dial button to MAX until the indicator light goes off.
2. Release the steam by pressing the steam button.
3. Wait for several minutes and let the steam penetrate through the fabric, and then
release more steam through pressing this buttons again.
Note:
1. There should be 3-5 seconds rest between two times of pressing the steam button in
order to obtain the best steaming result.
2. Fill the water to the MAX position before using this function.
3. In order to prevent the water leaking from the soleplate, please do not press the
steam button continuously more than 5 seconds.
VERTICAL STEAM IRONING
This is especially useful for getting wrinkles out of hanging clothes, curtains ect.
1. Fill the water tank with water as described in "Filling with water".
2. Plug in. The power/heating indicator lights / will turn on.
3. Turn the temperature control switch clockwise to the "MAX" position. Do not turn
the switch to" ●" or "●●"for steam ironing.
4. When the iron reaches the required temperature, the heating indicator light will turn
off.
5. Adjust the steaming by moving the steam control switch.
6. Hang the garment on a clothes hanger and pull the garment tight with one hand.
7. Hold the iron in vertical position with the other hand and press the steam button to
iron the garment. Touch the garment lightly with the soleplate of the iron to remove
creases.
8. After use, turn the temperature control switch to the "OFF" position.
9. Remove the plug from the wall socket.
10. After each use, make sure that the water tank is empty.
Caution: Do not use steam ironing on clothes or fabrics that are wearing people or ani-
mals. The temperature is too high.