Franke FCBU 1204 2M C WH Manual De Uso página 11

4. CONTROLS
L
Button Function
L
Turns the lights on/off at maximum strength.
Press and hold for approx. 2 seconds to turn the lighting system on and off at reduced intensity. -
T1
Turns the motor on/off at speed one.
Delay function:
Press and hold the button for approx. 3 seconds to Activate/Deactivate the Delay function
(automatic switching off of the Motor, the Fans and the Lighting with a 30' delay).
Cannot be enabled when Intensive or 24h are on.
T2 Turns the Motor on at speed two.
Press and hold the button for approximately 5 seconds, with all the loads turned off (Motor and
To turn the alarm off, press the button again and hold for at least 5 seconds. The relevant
T3
Turns the Motor on at speed three.
Press and hold the button for approximately 3 seconds, with all the loads turned off (Motor
and Lights), to perform a reset. The LED S1
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically
to the speed that was set before. If it is activated with the motor turned off, it will switch to
OFF at the end of the time.
just once.
S1 Signals the Metal Grease Filter saturation alarm, indicating that it is necessary to wash the Fixed.
When this is activated, it signals the Activated Charcoal Filter saturation alarm, indicating that the
Filter saturation alarm comes into operation after the Hood has been working for 200 hours.
T1 T2 T3 T4
S1
Led
-
Fixed.
Flashing.
Fixed.
-
Fixed.
-
Fixed.
-
Flashing.
11