Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Softwoods and low density wood: This kind of firewood release a lot of heat but burn too quickly and projects
embers and resin that foul the chimney and the interior of your woodstove.
Never use
Wood with varnish, exotic wood, paint, cement, agglomerates that can produce toxic fumes and will damage
the appliance.
All ADF appliances are designed to burn firewood and firewood only, with less than 20% humidity. The use of
firewood with humidity or other types of fuel not recommended will lead to the loss of warranty.
Appliance Layout
Each ADF device has its own characteristics duly indicated in this manual, and is also
summarized in table pg.8.
The serial number of the appliance is also marked on the appliance under the ash stopper and
in this manual page 2 on the respective CE marking label.
Moisture Vs Energy released by firewood
6,0
5,0
4,0
3,0
2,0
1,0
0,0
0
10
20
30
Moisture (%)
40
50
60
70
80
Designation
Pos.
1
Door handle
2
Air combustion control
3
Refractory firebox panel
4
Primary convection outlet
5
Secondary convection outlet (hot air distribution)
6
Flue outlet
7
Convection inlet
22
90
Tabla de contenido
