Remarks
1. Power supply voltage range is DC 5V, 2.1A, more than this voltage range maybe will damage the
electronic. As power supply for the LED function please only use devices with customary USB plug.
2. Cable link must be according to the assembly instruction (please note page 8, picture 7).
During assembly please make sure that no cables are kinked or crushed.
General
Please read and keep these instructions for future reference
These original instructions belong to this chair. They contain
important information about initial set up and handling.
Please read through these original instructions carefully,
particularly the safety instructions before using the chair.
Failure to follow these original instructions could lead to
serious injury, or damage to the chair.
The original instructions are based on standards and
regulations applicable in the European Union. Please observe
other country specific regulations and laws in other countries!
Please keep these original instructions for future reference,
if you pass the chair on to any third party, please be sure to
give them these original instructions.
Explanation of drawings
The following symbols and signal words are used in these original
instructions, on the chair or on the packaging.
WARNING! This signal word indicates a danger with a medium level of risk,
which could result in death or serious injury if it is not avoided.
CAUTION! This signal word indicates a danger with a low level of risk,
which could result in a minor or moderate injury if it is not avoided.
NOTE! This signal word gives a warning of possible material damage
or gives additional information about assembly or operation.
Statement of conformity: Products marked with this symbol meet
the requirements of EU regulations.
Do not reach into the housing of the chair.
The chair or parts there of may not be disposed of in domestic waste
(see chapter "Disposal").
The chair may only be used indoors.
Aufbauanleitung_Gamersessel_Game-Rocker_G-10_LED_V8_042021.indd 19
Aufbauanleitung_Gamersessel_Game-Rocker_G-10_LED_V8_042021.indd 19
19
12.04.21 14:15
12.04.21 14:15