Automatic Shut-Off; Overheating Protection - Mellerware Crunchy Medium Digital Manual De Instrucciones

ENGLISH
- To increase/decrease the
temperature or time quickly, press
and hold the control buttons (6) and
(10).
- During the cooking time the digital
display will show the discount of the
set minutes and the set temperature.
When there is 1 minute left, the digital
display will show the discounted
seconds.
- For a crispier result add a little oil to
the recipe.
- The fryer can be used to reheat
food. To reheat food, set the
temperature to 150°C, for a maximum
of 10 minutes.
SHAKING / STIRRING
- During cooking, remove the basket
(D) from the fryer and stir or shake
the food for better cooking.
- Note: You can remove the basket
(D) in the middle of cooking
without any problem. The fryer
stops automatically and the display
is replaced, the fryer restarts and
continues its programme.
- Avoid shaking or stirring the food
for more than 30 seconds so that the
fryer does not cool down.
Which foods to shake or stir?
- Small foods such as chips, cut
vegetables or nuggets usually need
to be shaken for optimal cooking.
- Without shaking or stirring, foods
may not be crisp or cooked properly.
IMPORTANT
- DO NOT TOUCH THE BASKET (D)
DURING AND FOR SOME TIME AFTER
USE AS IT BECOMES VERY HOT. HOLD
THE BASKET (D) BY THE HANDLE (F)
ONLY.
- The appliance will not work properly
if the basket (D) is not close properly.
food, cooking will not be even.
- Do not put anything on top of the
appliance as this could damage it.
- If the appliance is not started within
5 minutes, the appliance will go into
standby mode. Pressing the power
button (9) will switch the display
back on.
- Do not turn the basket (D) upside
down with the tray (E) attached to it
as the remaining oil at the bottom
of the basket (D) may leak into the
ingredients.

AUTOMATIC SHUT-OFF

automatically after 3 minutes if no
cooking programme is active.

OVERHEATING PROTECTION

- If the fryer overheats, it will switch
- Let it cool down before using it
again.
ONCE YOU HAVE FINISHED USING
THE APPLIANCE
- Unplug the appliance from the
mains.
- Clean the appliance as described in
the cleaning section.
THERMAL SAFETY PROTECTOR
- The appliance has a thermal safety
device which protects the appliance
from overheating.
and does not switch on again, unplug
it from the mains and wait for about
15 minutes before switching it on
again. If it still does not work, contact
our customer service team via the
web chat (Monday to Friday from
9:00 am to 6:00 pm) or by sending an
email to [email protected].
EN