Energeeks EG-AL003 Manual Del Usuario página 21

EG-AL003
Zone Type setting
Long press key [ ] and key [ digital 1/2/3/4 ], the LED of corresponding zone

will keeps flashing, then you can set the zone type by press the digital, the LED
will stop flashing after set successfully.
After long press key [
'beep' one second, it means set zone 1 to normal zone. It does not delay when
alarm, short press key [
Zone Method
1 Long press key []
zone
and key [ 1 ]
2 Long press key []
zone
and key [ 2 ]
3 Long press key []
zone
and key [3 ]
4 Long press key []
zone
and key [ 4 ]
21
] and key [ 1 ] + then press key [ 1 ] + [ 1 ], will sound

] to exit setting status.

Zone
attribute
Hint
Zone 1 LED keeps
flashing
1. Normal
Zone 2 LED keeps
flashing
2. Emergency
3. Chime
Zone 3 LED keeps
4. Welcome
flashing
Zone 4 LED keeps
flashing
Delay alarm
or not
Confirmation
Sound 'beep'
1 second
means set
successfully.
Short press
1. No
key [] to
2. Delay 30
exit setting
seconds
status.