Countertop Installation - edenox MICRA-2117-D Manual De Instrucciones

Countertop Installation:

· Remove all packing material and accessories.
· Examine the oven for any damage such as dents or broken door.
· Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface.
Installation:
1. Select a level surface that provide enough open space for the intake and/or outlet vents (Figure1).
2. Stacking and installation of the microwave oven. The maximum height of stacking shall be two layers.
Specific stacking installation is as follows:
(A) Unscrew and remove the mounting plate, and then tighten the screws.
(B) Remove the four screws as shown in Figure.
(C) Mount the mounting plate to the lower position and fix the screws that are just loosened.
A 10-cm spacing should be kept between the appliance and right and back walls, and a 30-cm spacing
kept on the top.Never dismantle the applicance's feet ,nor block the air intake and exhaust opening. The
left side must be open.
1) Blockingtheintakeand/oroutletopenings can damage the oven.
2) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause
interference to your radio or TV reception.
3) Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as
the voltage and the frequency on the rating label.
4) WARNING: the plug socket,electric appliances or the appliance which are liable effected by heat and
moisture should be kept away from any vents on the oven.
7/8
Fig 1
30 cm.
10 cm.
10 cm.
OPEN
A B C