HBK RTN/M2 Serie Instrucciones De Montaje página 11

Notice
How to use the enclosed grease tube
Before fitting the load cell, the enclosed grease must be applied to the upper thrust piece
and to the underside of the pendulum bearing (with RTN...B) in order to minimize friction
between the inside surface of the thrust piece and the load introduction element of the
RTN load cell or pendulum bearing.
Use of the spacer plates provided
The scope of delivery of the module includes 2 x 5 spacer plates. They are used for the
vertical adjustment of the module. Five plates max. are to be fitted underneath the upper
module plate, and five plates max. between the base and the cross bracket of the
anti‐liftoff device
Important
Ensure that all screws are fitted with U‐washers.
RTN/M2
9
MOUNTING PREPARATION