ASSEMBLY
ATTENTION
×
Assembly must be carried out by an adult. Keep children away, the product contains
small parts that can cause suffocation, pay special attention to protective materials
and packing bags.
×
Make sure that the power switch is set to "OFF" before assembling the equipment.
−
Before first use, charge the battery for at least 10 hours.
ATTACH THE TRAILER LINKAGE & DRIVING WHEEL
Turn the vehicle body downside up.
1.
Fit the trailer linkage to the vehicle
body.
2.
Insert four ø4x12 flat head screws
through the trailer linkage and
into the vehicle body and tighten
with a screwdriver.
3.
Slide a driving wheel into the rear
axle. Ensure the driving wheel
match up with gear box on the
vehicle body.
4.
Slide a ø8 washer into the rear
axle.
5.
Tighten a lock nut to the end of
the rear axle. Repeat steps 3-6 for
the other driving wheel.
6.
Insert the driving wheel hubcap to
the driving wheel.
47
EN