Idiomas disponibles
Idiomas disponibles
Do not dispose of this product as normal household waste. Take it to
your local refuse collection site.
Function
a
Filter housing
d
di box
medi box lid
h
chamber
A
Assembly / Putting into operation
A
Fill medi box
medi box lid
c
medi box
B
First put filter cartridge
medi box in filter lid
nibs of the filter lid
a
housing
and shut filter lid.
C
Install the interior filter on the left or right back corner of the
aquarium with the suspension bracket
plugging in the mains plug.
Important: The pump must not run dry!
B
Cleaning
A
Disconnect the filter from the mains, and then pull upwards
out of the tank.
B
Open filter lid
C
Then clean the medi box and wash out the filter cartridge. Only
rinse off slightly the EHEIM SUBSTR Tpro biological filtering ma-
terial und lukewarm water so as to preserve the bacterial lawn and
to accelerate its redevelopment. fter the second or third cleaning,
replace two-thirds of the filter material with new EHEIM SUB-
STR Tpro. Mix the rest of the used filter material with the new
material so that the bacteria cultures multiply faster. fter the
second or third cleaning, replace the filter cartridge.
Important: Do not overfill the medi box, as otherwise it
will no longer fit precisely.
C
Maintenance
Disconnect the filter from the mains, and then pull upwards out
of the tank.
A
Take off the pump lid
pin on the pump lid and clean.
B
Take off dosing chamber lid
pump chamber and outflow opening with cleaning brush (order
no. 4009560). fterwards, put the pump impeller back in, and
close with pump lid. Put the filter back in the aquarium and put
into operation using the mains plug.
Internal filter
Model: see type plate on motor body
b
Suspension bracket and light fixture
e
Dosing chamber lid
c
with filtering material included and close with
d
. Thoroughly rinse out filter cartridge
under running lukewarm water.
f
until it clicks into place. Insert the two
f
into the grooves on the bottom of the filter
f
, take out medi box
j
Filter cartridge
i
Pump impeller
e
in the filter lid
, take off the pump impeller
h
, and clean dosing chamber
f
Filter lid
j
f
, then also insert
b
. Put into operation by
c
and filter cartridge
c
me-
g
Dosing
Pump lid.
e
and filled
e
.
i
with the
g
,
