Emerio CH-106492 Manual De Instrucciones página 6

CH-106492
PARTS DESCRIPTION
1. Air outlet
2. Power switch (750W; 1250W; 2000W)
3. Thermostat
4. Air inlet
5. Feet
OPERATION OF THE HEATER
Note: When the heater is turned on for the first time, or when it is turned on after a longer period of storage,
it is normal that the heater may emit some smell and fumes. This will disappear when the heater has been on
a short while.
Set the thermostat to the minimal position and insert the plug to the power supply.
⚫
Turn on the power switch: low heating = 750W; medium heating = 1250W, high heating = 2000W (Both
⚫
switches are on). When the power switch is on, the indicator light on the switch will illuminate.
Turn the thermostat knob in a clockwise direction to the max position.
⚫
Once the room temperature has reached the desired value, turn the thermostat knob slowly in
⚫
anti-clockwise direction until you hear a "click" sound; this is the setting temperature.
The appliance will automatically maintain the setting temperature. It will switch on when the room
⚫
temperature is below the setting, and switch off if it is above the setting.
Caution: The heater will remain hot for some time after it is turned off. Handle with care.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance automatically in case of
overheat, e.g. due to the total or partial obstruction of the grids. In this case, unplug the appliance, wait
about 30 minutes for it to cool and remove the object which is obstructing the grids. Then switch it back on
as described above. The appliance should operate normally. Should the problem persist, please contact the
nearest customer service.
CLEANING THE HEATER
Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. Clean
the outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or
abrasives and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power consumption: 1800-2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
- 5 -
EN