ENG
POWER SUPPLY.
Make sure the power supply is adapted to the
►
requirements shown on the information panel of
the grinder (1)
Using the motor at low voltage
►
will make it operate slowly
performance and may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
►
power supply, use an extension cord of enough
diameter and quality.
DISC ASSEMBLY.
Press the block button (2)
►
press the block button when the disc is completely
still
The block button should only be used for
►
mounting and dismounting of the grinding discs
Loosen the disc tightening bolt using with the
►
provided accessory (3)
working surface facing outwards (4)
tighten the nut with the hand over installed disc (5).
PREPARATION.
Verify that the disc diameter has the correct
►
measure
Before operating the grinder, check if
►
the disc is well tightened (6)
should be properly mounted and fixed (7)
the spindle and check it manually for any faults (8).
STARTING ON.
The grinder is fitted with a safety start switch
►
To start working, please pull it towards and then
►
push it and the button will hold (9).
MAINTENANCE.
The grinder has been designed for a long
►
working life with minimum maintenance
Optimum use depends on correct care of
►
the grinder and regular cleaning
accidents, always unplug the grinder from the
power source before cleaning or performing
any maintenance
The grinder may be cleaned
►
effectively using compressed air after each
use
If compressed air is not available, use a
►
brush to remove dust from the grinder
ventilation vents and switch levers must be dept
clean and free of foreign matter
to clean by inserting pointed objects through
openings
Cetain cleaning agents and solvents
►
damage plastic parts, among them are gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household cleaners
containing ammonia
This will reduce
►
Warning! Only
►
Fit the disc with the
►
To slightly
►
Make sure the guard
►
►
To prevent
►
Motor
►
Do not attempt
►
Do not use any of these
►
to clean the grinder
occur, have a Werku
and/or replace the carbon brushes.
ENVIRONMENT PROTECTION.
The materials and components that have
►
been used to manufacture this product can be
re-used and recycled
an Integrated Management System that is in
charge of the correct elimination of the residues
of this product
with domestic residues
clients a free collection service of these residues
through any of its sale points, or in the collection
points established by the Integrated Management
System or in the recycling point of your locality.
WARRANTY AND TECHNICAL SERVICE.
Apart from the legal guarantee, Werku
►
an additional commercial guarantee
commercial guarantee covers the repair of all
defects found due to faults in the materials or
manufacture
necessary for these defects to appear within the
validity period
Turn
repair of all defects that Werku
included in the commercial guarantee (shipping
costs, labour costs and materials included) as
chosen by Werku
replacement (if necessary with a later model)
This commercial guarantee does not affect
►
consumer's rights established by law according to
Directive 1999/44/CE
is valid for 24 months
for professional or industrial use, the validity period
is 12 months
date of purchase by the first consumer
is shown on the invoice or receipt of purchase
Actions for claims against this commercial
►
guarantee expire six months from the end of
the validity period
commercial guarantee must be presented to the
distributor or the Technical Assistance Service
do so you must present this guarantee correctly
completed and stamped by the distributor, together
with the sale invoice or receipt
any information in relation to this commercial
guarantee, the buyer and/or distributor may contact
the Technical Assistance Service by telephone
on +34 981 648 119, or by e-mail at info@werku.
com
This commercial guarantee does not
►
4
English
Should excessive sparking
►
official repair service exam
®
Werku
is adhered to
►
®
Do not eliminate this product
►
Werku
►
®
For this cover to be effective it is
►
The consumer is entitled to free
►
recognises as
®
, either via the repair or by
®
This commercial guarantee
►
If this product is destined
►
The validity period starts on the
►
Any claims arising from this
►
In order to require
►
offers to its
offers
®
This
►
This date
►
To
►