Changing Settings - geberit MONOLITH PLUS Instrucciones De Uso

Changing settings

1
Press and hold the
<Odour extraction> button for
approx. three seconds.
✓ Both indicator lights flash three
times. You are now in Settings
mode.
2
Change the setting (see step 3) or
press the <Odour extraction> button
repeatedly until you reach the
desired menu.
✓ The selected menu is indicated
by the colour of the odour
extraction unit indicator light.
3
Press the <Large flush volume>
button repeatedly to change the
setting.
✓ The selected setting is indicated
by the colour of the orientation
light.
36028800640352395 © 02-2022
968.239.00.0(04)
4
Press the <Small flush volume>
button to save the setting you have
made.
When the settings are saved, the
orientation light flashes briefly as
confirmation. If the settings are not
saved or if no changes are made
within three minutes, the unit
automatically exits setting mode
without changing the existing
settings.
5
Press and hold the
<Odour extraction unit> button for
approx. three seconds to exit
Settings mode.
Result
✓ Both indicator lights flash three times.
The sanitary module is once more
ready for operation.
EN
15