Display Devices - exone A Manual

To access the Display control panel in Windows:
1. Right-click the desktop and select Display settings from the
menu.
2. Choose the required display settings from the menus.
To access the Intel ® Graphics Command Center:
1. Access the Intel® Graphics Command Center from the Start
menu in Windows
To access the NVIDIA Control Panel:
1. Access the NVIDIA Control Panel from the Start menu in Win-
dows

Display Devices

Note that you can use external displays connected to the
HDMI-Out port and/or Mini DisplayPort and/or Display-
Port over USB 3.2 Gen 2 Type-C port and/or Thunderbolt
4 port. See your display device manual to see which for-
mats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 5 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
5 Connected Displays
Note that when 5 displays are connected, only 2 displays
may be configured in Duplicate mode.
22
.
.

To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Right-click the desktop and select Display settings from the
menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 5 displays from the Multiple displays
menu.
To configure the displays using the Project menu:
1. Attach your external display(s) to the
appropriate port, and turn it(them) on.
2. Press the + P (or Fn + F7) key
combination.
3. Click on any one of the options from
the menu to select PC screen only,
Duplicate, Extend or Second screen
only.
4. You can also click Connect to a
wireless display at the bottom of the
Project screen and follow the steps to
connect to any wireless enabled
display.
Figure 15
Display (Multiple
displays)
Figure 16 - Project