Before First Use; Cleaning And Care - Klarstein DM-B Manual De Instrucciones

BEFORE FIRST USE

1. Remove all packaging material.
2. Place the appliance on a flat, dry surface away from direct sunlight and away
from other heat sources (e.g. oven, cooker or heater). Leave at least 10 cm
space between the appliance and walls or other objects on all sides.
3. Make sure that the power plug is accessible at all times and can be
disconnected from the mains immediately in an emergency.
OPERATION
1. Fill the desired ingredients such as water, milk powder, sugar into the mixing
container. Attention: Use only water-soluble ingredients and/or small, soft
fruits
2. Place the mixing container on the holder of the blender (milkshake machine)
after you have filled all the ingredients into the mixing container. Attention:
Use the right amount of water to mix the ingredients. Observe the maximum
filling quantity marking on the mixing container.
3. Press the "On/Off" switch on the control panel to switch on the appliance and
start the mixing process.
4. Hold the upper end of the appliance during the mixing process.
5. The drink is usually mixed after about 5 seconds.
6. Switch off the appliance before removing the mixing container.

CLEANING AND CARE

1. Switch off the device immediately and pull the power plug out of the socket.
2. Clean the inside of the mixing bowl with a mild, diluted detergent, lukewarm
water and a soft cloth.
3. Clean the outer housing surface with a mild, diluted detergent, lukewarm
water and a soft cloth.
4. Dry internal and external surfaces with a soft cloth.
5. Clean the motor unit with a dry soft cloth. Do not use water for cleaning.
EN
11