Control Interface - NOVAERUS Defend 400 Manual De Usuario

7.3 Control Interface

The Defend 400 can be controlled using touch screen interface on the top of
the device. Figure 3 below provides a labelled layout of the interface along with a
description of each of the elements below that.
4
3
2
1
Power button.
1.
Power state indicator.
2.
Reduce airflow speed button.
3.
Airflow speed indicator.
4.
7.3.1 Power Control
The device can be switched ON and OFF using the power button [1] on the
left-hand side of the control interface. The power state indicator [2] will be
illuminated blue when the device is powered ON and grey when powered OFF.
7.3.2 Airflow Control
The airflow of the device can be controlled using the increase airflow button [5]
on the right-hand side, and the reduce airflow button [3] on the left-hand side.
The current airflow setting is indicated in the centre by the airflow speed
indicator [4], as series of 5 dots which light up from left to right as airflow speed
is increased.
7.3.3 Save Airflow to Memory
The current speed setting can be saved to memory using the save speed button
[7]. In the case of a power failure, the device will power back ON directly to the
saved speed. The blue indicator on the save speed button [6] will be illuminated
when a speed is saved. To clear a saved speed, use the clear saved speed button
[7]. The indicator for saved speed will turn off when the saved speed is cleared.
Document No. 70-00001-01-REV-B
COPYRIGHT ©2021 Novaerus
2
Figure 4 – Defend 400 Control Interface
5.
6.
7.
3 4 5 6 7
Increase airflow speed button.
Indicator for save speed setting.
Save/clear saved speed button.
5
6
7
15