CRAFT+MAIN LAGOON LGRLSC Manual De Instrucciones página 9

INSTALLATION PROCEDURE / STEP 6
6
1. Remove the clip from door guide(10).
2. Mark hole on the tray/floor for bottom guide.
3. Use ¼" drill bit - drill through.
4. Put wall anchor(8) into the hole.
5. Use flat head screw(9) fix bottom guide and install connector kit(11) to connect bottom guide.
LEFT HAND ASSEMBLY
1/4"
(6mm)
RIGHT HAND ASSEMBLY
1/4"
(6mm)
- 8 -