Broadcast Mode Settings; Firmware Update - DJI Video Transmitter Guía De Usuario

Tabla de contenido

Idiomas disponibles

In the home screen, press the menu dial on the video transmitter to enter the menu. Users can

set the device number, enable Broadcast mode, select Broadcast image quality, select language,

and view the video transmission channel status and device information. Turn or press the dial to

select or confirm settings in the menu. Press the back button to return to the previous screen.

Broadcast Mode Settings

Broadcast Image Quality

When Broadcast mode is enabled, the Broadcast Quality setting will appear in the menu. Select

between HD and Smooth. These two kinds of image quality correspond to 40M (HD) and 20M

(Smooth) for the Downlink Bandwidth setting on the remote monitor. When the image quality is

set to Smooth, more channels are available than HD.

Mode Priority

When the video transmitter is linked to the remote monitor in Control mode and Broadcast mode

is enabled, users can select the prioritized mode in the video transmission channel settings on

the remote monitor to ensure transmission signal quality for specific devices.

Broadcast Mode Prioritized

When Broadcast mode is the prioritized mode, the transmission signal quality of the devices in

Broadcast mode will have a priority. Users can select the channel manually on the remote monitor

and then select the broadcast channel and image quality on the video transmitter.

Control Mode Prioritized

When Control mode is the prioritized mode, the transmission signal quality of the devices in

Control mode will have a priority. Users can select the channel mode on the remote monitor

and then select the broadcast channel and image quality on the video transmitter. In this mode,

devices in Broadcast mode near the remote monitor may have a weak transmission signal.

Update the video transmitter using the DJI Assistant 2 (Ronin Series) software.

1. Power on the device and connect it to a computer with a USB-C cable.

2. Launch DJI Assistant 2 (Ronin Series) and log in with a DJI account.

3. Select the device and click Firmware Update on the left side of the screen.

4. Select the firmware version.

5. The firmware will be downloaded and updated automatically.

6. The device will restart automatically after the firmware update is complete.

Tabla de Contenido

Tabla de contenido