User Controls - Advanced Bionics CHORUS Instrucciones De Uso

The sound processor must be in an Aux Enabled Program, in order to listen to
sound coming from the auxiliary input. Consult your audiologist and/or fitting
report to verify that you have an Aux Enabled program.

User Controls

Power/Program Button:
Changing Programs: The Chorus Sound Processor can store up to
3 programs. With the sound processor powered on, press the power/
program button once, for about 1 second, to advance to the next program.
The sound processor will advance back to program 1, when advancing from
the last program in the sequence (e.g. from program 2 to 1 if 2 programs
are present, or from 3 to 1 if 3 programs are present).
Power on/off: To turn the power off using the power/program button, hold
down the button for at least 4 seconds. To turn the power on, press the
button until the LED status indicator illuminates.
NOTE: Turning the power off and then back on always resets the Chorus Sound Processor to
program 1, and volume in the middle position. Sensitivity will start in the position set for program
1 during fitting.
12