Safety Instructions; Description And Function; Intended Use - Goobay 60656 Manual De Instrucciones

EN
Bike Powerbank

1 Safety instructions

The user manual is part of the product and contains
important information for correct use.
• Read the user manual completely and careful-
ly before use.
The user manual must be available for uncertainties
and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit the battery or immerse it in li-
quids.
There is a danger of: Explosion, fire, heat, smoke
and/or gas.
Do not operate a device if it is not in working order.
In such cases, it must be secured against unintenti-
onal further use.
• Use product, product parts and accessories only
in perfect condition.
• In case of questions, defects, mechanical da-
mage, trouble and other problems, non-recover-
able by the documentation, contact your dealer
or producer.
The rechargeable battery is not replaceable.
Batteries may be damaged and leak if not used for
the intended purpose.
• Leave leaked, deformed or corroded batteries in-
side the product and dispose it by appropriate
protectives.
• Avoid stresses such as heat and cold, moisture
and direct sunlight, microwaves, vibrations and
mechanical pressure.
Extreme heat can lead to explosion and/or leakage
of corrosive liquid. Mechanical damage can cause
gaseous substances to escape, which can be highly
irritating, flammable or toxic.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation
against accidental use.
• Place, install and transport product, product parts
and accessories in a safe way.
• Do not operate in an explosive environment.
Blinding
• Do not use the LED light in road traffic!
• Never look directly into the light source.
• Do not aim the beam of the light into the eyes of
other persons, animals or reflective surfaces.
The eyes can be damaged!

2 Description and function

2.1 Product
The product is a mobile auxiliary battery for char-
ging and powering mobile devices, including a bike
mount and charging cable. The product also has an
LED light that can be used as a torch and supports
the QuickCharge standard and the
USB-C™ PowerDelivery standard.
2.2 Scope of delivery
Bike Powerbank 5.0 (5.000 mAh), Bike Mount,
Charging Cable, User Manual
REV2022-09-08 Subject to change without notice.
V1.0aw
2.3 Operating Elements
See Fig. 1.
1 USB-C™ socket
2 USB-A socket
3 LED light
4 Function button

3 Intended use

We do not permit using the device in other
ways like described in chapter „Description
and Function" or in the „Safety Instructions".
Use the product only in dry interior rooms. Not at-
tending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages
to persons and property.
4 Preparation
1. Check the scope of delivery for completeness
and integrity.
2. Compare the specifications of all used devices
and ensure compatibility.
5 Mounting
1. Remove the screw from the bike mount.
2. Clamp the bike mount to the frame of your bi-
cycle.
Make sure that the operating elements of the bicy-
cle are not obstructed.
3. Reinsert the screw of the bike mount and screw
it tight.
4. Slide the power bank into the top of the bike
mount.
6 Connection and operation
6.1 Switching the powerbank on and off
• Press the function button 1x briefly to switch on
the power bank.
• Press the function button 2x briefly to switch off
the power bank.
6.2 Charging the powerbank
The powerbank is supplied partially charged. Ful-
ly charge the powerbank before using it for the first
time!
1. Connect the USB-C™ socket of the powerbank
to a USB power source via a charging cable.
This can either be a 230 V USB charging adap-
ter, a 12/24 V car USB charger or the USB socket
of a PC.
2. Disconnect all cable connections after charging.
6.3 Charging your mobile device
1. Connect your mobile device to the USB-C™ or
USB-A socket.
Your mobile device is charging.
2. Disconnect all cable connections after charging.
6.4 LED indicator
See Fig. 2.
The charging status of the power bank is shown via
the LED indicator. The LEDs light up or flash blue
depending on the battery status. If the QuickCarge
function is active, LED 1 lights up green.
- 4 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
60656
5 LED indicator
6 Bike mount
7 USB-A plug
8 USB-C™ plug
Goobay® by Wentronic GmbH