Hart HPSV25 Manual Del Operador página 8

MAINTENANCE
CLEANING/REPLACING THE FILTER
See Figure 12, page 11.
 Remove the battery pack and the dust bowl.
 Remove the separator assembly by pulling it out of the
dust bowl.
 Shake or lightly brush any dust or dirt off the separator
assembly.
 Remove the filter frame and filter from the separator
assembly.
 Remove the filter by lifting away from the separator
assembly. The filter may be rinsed if necessary.
 Empty the dust bowl; wash if necessary. Before
reattaching to the stick vac, make sure all pieces are
completely dry.
NOTE: ILLUSTRATIONS START ON PAGE 9
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
NOTE: Allow 24 hours for parts to dry completely.
 Reinsert the filter and filter frame into the separator
assembly.
 Install the separator assembly into the dust bowl.
 Position the two sections as shown.
 Reattach the dust bowl by securing the hook on the dust
bowl to the tab on the handle.
NOTE: Make sure hook is secured to the tab before
securing the dust bowl.
 Snap the two sections together.
When purchasing a replacement filter, request recommended
part number HASV25.
8 – English