Maintenance/Repair - i.safe MOBILE IS-TC1A.2 Manual De Instrucciones

Unscrew the cover of the ISM interface (1) located on the IS530.2.
Push the IS530.2 completely into the holder (2) of the device.
Attach the plug on top of the ISM interface (3).
Fix the plug by pressing the rounded end of the plug (4).
Tighten the screw (5).
Check whether the plug is correctly and firmly attached to the ISM interface.
The device can now be used together with the IS530.2 in explosion hazardous areas.
INITIATION
NOTE:
The following information applies to IS-TC1A.2 in combination with the IS530.2.
Download and install the Seek Thermal application from the Google Playstore.
Open the Seek Thermal application at the IS530.2 and you can start immediately .
CHARGING THE IS530.2
You can charge the IS530.2 via the magnetic charger port on the IS-TC1A.2.
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the IS530.2 outside of explosion hazardous areas. Do not charge the IS530.2 in
the vicinity of flammable substances.
NOTICE
Incorrect charging can cause damage to the device.
Follow the instructions in the „Charging" section of the IS530.2 operating manual.
Only charge the IS530.2 using the Magnetic Charger Cable (included in the IS530.2
package).
Connect the Magnetic Charger Cable to the magnetic charger port on the IS-TC1A.2.
POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service under the menu item "FAQ".
If you have any further questions, please contact the i.safe MOBILE repair service at
www.isafe-mobile.com/en/support/service

MAINTENANCE/REPAIR

The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or fire, which can result in death or severe injuries!
Do not open the device or carry out any repairs yourself.
Contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service if
the device is not working normally, if the device needs to be repaired or if a replacement part
is required.
8