Cleaning And Care - iDance Energy XD2 Manual De Instrucciones

EN
16
OPERATION
• Switch the device on. BT is automatically activated. Activate BT on your
smartphone/tablet.
• Connect to XD2 from the list of BT devices within range.
• If the connection is successful, the LED ring on the PLAY / PAUSE button
lights up. If the connection is not active, the LED ring flashes.
Playing music
Use the PLAY / PAUSE, NEXT and PREVIOUS buttons to navigate through
your music library. Make sure that you use the cross fader to control the
desired channel.
Radio
Press MP3 / FM to select FM mode. Press (when using for the first time or
after moving house) PLAY / PAUSE for a full channel search. The stations found
are automatically stored in the available station memories and can then be
switched through with NEXT / PREVIOUS.
Light effect
Press LED ACTIVATE to turn the light effects on or off.

CLEANING AND CARE

• Use a soft cloth to clean the surface of the speaker. Do not use scouring
pads, scouring agents or harsh cleaning agents for cleaning.
• If the speaker does not work properly during a thunderstorm, unplug it
from the mains socket and plug it back in after one minute.
• Do not allow small objects or liquids to enter the speaker.
• If you find small objects or liquid inside the speaker and smoke or odour
comes out, disconnect the speaker from the mains immediately and
contact a specialist company for inspection and repair.