Twin Star Home 26DE1247 Instrucciones Para El Montaje página 5

5. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 4. Then locate Mantel/Top
(G) and lay fi nished side up on top of
completed assembly. From the inside, attach
Mantel/Top (G) using Bolts (L) and Washers
(M) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
6. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
7. Remove the two mounting brackets attached
to the back of the Left and Right Front panels.
Set aside with the wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUCTIONS
PRIOR TO INSTALLING ELECTRIC
INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR FIREPLACE
8. Lift insert carefully into the back of the unit
and center in the insert opening. Do not drag
insert across Hearth/Base (A) as it may
scratch your unit.
9. Install the mounting brackets to hold insert
fl ush against the inside of the mantel front
panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
FINAL POSITION.
E-4
Mantel/Top
G
N
N
Completed
Unit
N
M
L
Install
Insert
From
Back
Electric Fireplace
Insert
N