Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Instructions for use
The appliance is ready for use when plugged into a socket. Adjust the switch-settings
(3 temperature settings, 2 speed settings) on the desired power level.
You can press the cold button for any of the heat and speed settings.
①
9-ft long cord with hang loop
Rear housing
②
③
Removable air filter
Anti-slip side bumpers
④
Front housing
⑤
⑥
Cool shot button
Three temperature setting button
⑦
⑧
Two air speed setting button
65 mm & 80 mm concentrator nozzles
⑨
Cleaning
Only clean the appliance when it is cold.
Unplug the appliance.
Clean the exterior with a slightly damp cloth.
Unscrew & clean the removable air filter regularly.
Regularly inspect the inner air inlet grill (located below removable air filter)
to see if it is dirty. If necessary: clean the inner air inlet grill with a suitable brush,
to remove dust and hair. Do not operate the hairdryer with a clogged filter.
Do not allow water or other liquids onto or inside the appliance.
Safety precautions
Before using the hair dryer, make sure that the appliance's plug conforms to that of the
socket. Basic precautions, including those listed below, must be followed when using
electrical appliances especially if there are children nearby.
Your hairdryer is a high performance product and the nozzles get hot when in use.
DO NOT place on a heat sensitive surface. Allow to cool before touching.
General specifications
Voltage: 125V~
Wattage: 1875W
2
⑨
Frequency: 60Hz
Weight: 14 oz/396 g
④
⑤
⑥
⑦
⑧
Accessories: 65 mm nozzle,
80 mm nozzle, storage bag
③
②
①
Tabla de contenido
