Installation; Electrical Installation - Frigidaire LD17Y Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3. Installation

For your tranquility call the Frigidaire Service Station
to install your washing machine. Installation fee is
charged for this service.
Unpacking
Lift the product with the help of
another person, and remove the
package base.
Remove the whole packagebefore
turn the product on.
Location
Avoid installing your product
under clotheslines and places
exposed to rain, excessive
moisture or leaks (eg bathroom).
Never throw water on the panel of
the product, as it may damage it.
For panel cleaning, use only a
damp cloth.
Leveling
Be sure the washing machine is
resting properly.
Fill it with water at low level and
check if water is accompanying
the drum holes on the same line.
If it is not, adjust the feet, adjust
the feet by rotating them manually.
All feet must be supported on
the floor. This will prevent shake
and noise.
Do not use feet different from
the original ones.
All manuals and user guides at all-guides.com

Electrical installation

Before connecting your
product, check if the voltage
in the socket where the
product will be plugged
is the same to the voltage
indicated on label located
near the plug (power cord).
There is a protection to prevent damage to the
electrical system of your washing machine.
If your washing machine 127V is connected to a
voltage different from the label (220V) or if your
machine 220V is connected to a voltage different
from the label (127V), an automatic recognition
system of voltage will not allow the washing machine
to works. However, it will not cause any damage
to the electrical system of the machine. In these
cases, the light blue of the ON / OFF key will blink.
Disconnect the plug from the outlet and see if the
voltage is correct.
Connect your product to
an exclusive socket, do not
use extension cords or T
type adaptors. Do not use
adaptors.
If the outlet of your residence is still in the old
standard, we recommend its replacement and
adjustment with an electrician you trust.
Remember that to take advantage of the progress
and safety, it's necessary to ground the outlet, as the
electrical installation standard. If in doubt, consult a
professional in the area.
WARNING
WARNING
23
Tabla de contenido

Solución de problemas

loading

Tabla de contenido