Cleaning And Maintenance - Uten HP212-D Instrucciones De Operación Y Seguridad

HOW TO USE YOUR ELECTRIC BURNER
· Before plugging in your new burner, check to see that the electric circuit
is not overloaded with other appliances.
This unit should always be operated on a separate 120Volt AC outlet.
· Be certain that the unit is set on a levelled, flat, heat resistant surface.
Also avoid using pans that are unstable and easily tipped.
· Place pan on heating element.
· Turn the temperature control knob to the desired heat setting. The power
indicator light of the switch
will glow indicating that the heating element is turned on and heating will
begin immediately.
CAUTION: NEVER touch the heating elements while the burner

is in operation. Doing so will lead to serious personal injury.
·When cooking is complete, turn the temperature control knob to the
"OFF" position.
· If the burner is not in use for a long period of time, it is highly
recommended to unplug the unit from the outlet. This prevents any
accidental burns or injury.
· When all parts have thoroughly cooled, be sure to clean the burner.
Dry all parts thoroughly before storing or operating the burner.

CLEANING AND MAINTENANCE

·Wipe off the base and heating element with a damp soapy cloth.
CAUTION: NEVER immerse the base in water or any other liquid.

·Thoroughly clean and dry all parts.
·DO NOT USE ANY ABRASIVE SOAPS, DETERGENTS, OR
CLEANING MATERIALS TO CLEANING MATERIALS TO CLEAN
THE BURNER.
·Any other servicing not recommended by the manufacturer may
cause hazards and should be performed by an authorized
representative.
4