Assembly And Operation; Installation Procedure - Mobiclinic FORTUNA Manual De Instrucciones

FORTUNA

4. ASSEMBLY AND OPERATION

4.1. Inspection
Please verify if there are missing parts (checklist for accessories
shall be subject to list attached with the product).
Description Quantity
DESCRIPCIÓN CANTI D AD
Frame
Estructu ra
Control box
Caja de control
Actuador
Actuator
Control+Cable
Controller + cable
Open spanner
Manual de
#16 and #17
instrucciones
Step 3 : Installation of control box
1. Fasten the 2xM5x10 screws into threaded holes on the frame
as in the following picture:
Step 4: Remove and install the battery box.
1. Removal: press down the switch A and remove the battery
following the direction of B (Fig. 1).
2. Installation: Put the battery in place and press the switch
along the C direction. Make sure that the battery does not
separate without pressing the switch (Fig. 2 and 3).
ES
Image
IMAGEN
1 set
1 pc
1 pc
1 set
1 pc N/ A
EN FR IT DE

4.2. Installation procedure

Step 1: Release the locknut and bolt and the raise up the frame
and align the holes. Fix bolt as shown in drawing on the right
and have not properly attached (make sure no movement on
the frame).
Step 2: Release the strap.
1. Locknut
2. Bolt
3. Strap
2. Rotate the lock to direction of open. Fasten the control box into
the frame and have the upper screws locked.
3. Turn the lock 90 degrees to the right and lock the control box.
PT NL PL
SWE
DK
12