Ashdown Engineering LITTLE BASTARD 2.N Manual Del Usuario página 9

LITTLE BASTARD 2.N
TWO NOTES: GET STARTED
1. To get the best out of your LB 30 2.N, you will need to install the TORPEDO REMOTE
software. See below to get the link for your device:
Mac OS X 10.9+ : https://www.two-notes.com/download/76392/
Windows 32-BIT : https://www.two-notes.com/download/76390/
Windows 64-BIT : https://www.two-notes.com/download/76391/
Download the software and follow the instructions on-screen.
2. Once the TORPEDO REMOTE is installed, connect your LB 30 2.N to the comuser using
a USB A to USB B cable. The USB socket is located on the rear of the amplifier.
3. Switch the LB 30 2.N on using the rear mains switch. You do not need to connect any
other leads at this time to the amplifier and a speaker is not required. The Class D output
stage allowers for user without a speaker or load attached.
4. Once plugged in, your computer will recognise the LB 30 2.N and install device drivers.
If you wat to check it has installed correctly, in Windows go to: control panel > device
manager > view and click on "Devices by Container" and the LB 30 2.N should show up at
the bottom of the list.
5. You can now start the TORPEDO REMOTE software from the desktop icon.
6. Follow the instructions on screen and click "OK" and your software will connect to the LB
30 2.N and open up the software interface.
7. The LB 30 2.N will have already installed withthe correct Two Notes firmware and
presets by it has not been registered with Two Notes yet. You must now sign up for a free
account and register your LB 30 2.N so it is linked to your account. This allows you to back
up any user-created presets and purchase more CAB SIMs to use with your amp.
LITTLE BASTARD 2.N
USER GUIDE
All your licenses will the be easily accessible through the software interface which connects you
to your online account.
8. Registered online? You are ready to play! There is the option to use your Two Notes as a guest
but you will not get all the benefits from having an account.
9. It is important to spend some time to get to know the various facilities of the software. Two
Notes includes: EQ sections, a Noise Gate, a fully configurable Reverb, an Audio Enhancer, a
Power Amp selector, two Microhoines that can be selected and positioned to your preference, a
guitar tuner and an output level control.
10. To confirm that the software is fully linked to your LB 30 2.N, switch the top panel SIM PRESET
switch to all 6 postiitions and see the resulting chane on the software interface. The SIM LEVEL
control when adjusted should move the purple level slider on the software interface.
11. You are now ready to start playing and recording music, so just connect your LB 30 2.N to an
audio interface via the CAM SIM XLR output and plug your guitar into the input on the front of
the Amp.
12. When you are playing, tyou can change all of the parameters in real time and see all the
different effects that they can have on your tone.
13. When you have finished setting up your tone, you can save this new configuration by clicking
on "save" next to the preset name at the top of the screen. Clicking this will open the SAVE PRE-
SET menu. Only the first 6 presets in the list will be accessible by the LB 30 2.N so you will be able
to move these around and put your favourites to the top etc. Now switching the SIM PRESET on
the LB 30 2.N to position 1 will access the newly created preset.
14. The CAB SIM XLR output is post-EQ, post-Master Volumes, post-FX LOOP meaning that all
front panel controls will affect the CAB SIM signal. You can add any number of pedals in the input
of the LB 30 2.N and in the FX LOOP, these will all be included in the CAB SIM signal output.
USER GUIDE