Operation; Inserting/Replacing The Batteries; Setup / First Use; Display Indicators - Silvercrest SSE 6 D2 Instrucciones De Utilización Y De Seguridad

Operation

Inserting/replacing the
batteries
Caution! Product damage!
Note: Always observe the polarity indicated
on the battery compartment
the batteries!
Note: Always use batteries of the type
Micro AAA, LR03.
Note: Always use batteries of the same type.
T urn the lid of the battery compartment
anticlockwise until the point on the
4
lid is adjacent to the point "
product and the lid can be removed (see
Fig. C).
R emove the lid from the battery compart-
ment .
4
R emove the old batteries, if present.
I nsert new batteries according to the
polarity diagram of the battery compart-
ment .
4
C lose the lid of the battery compartment
by replacing it onto the battery com-
4
partment and turning it clockwise until
4
the point on the lid is adjacent to the point
" " on the product (see Fig. C). Pay at-
tention to the recesses on the housing.
The display lights up green and all in-
9
dicators flash 3 times. If the dispenser
does not contain any soap, the "Fill
level" indicator
13

Setup / First use

P lace the product on a suitable, level
surface.
O pen the lid .
1
when inserting
4
" on the
continues to flash.
P ull the plug from the soap refill
2
opening .
3
P our liquid soap into the soap tank.
Note: During filling, note the "Max"
mark that is visible, if you look into the
soap tank. Never exceed the "Max"
mark when filling with soap! Otherwise,
the product may overflow (see Fig. A).
Note: Pour in at least 130 ml of soap;
otherwise, the "Fill level" indicator
will flash.
R eplace the plug
opening .
3
R emove the protective film from the
display and close the lid
9
product is now ready for use.

Display indicators

Note: The display indicators are only visible
if the lid is open.
1
The "Soap quantity" indicator
the amount of soap dispensed for each
use.
The "Fill level" indicator
much soap remains in the soap tank.
The fewer bars are visible, the less soap
there is in the soap tank. If only one bar
remains the "Fill level" indicator
gins to flash. Refill the soap tank.
Note: Pour much soap in the soap tank
until the indicator stops flashing.
The "Battery" indicator
charge level of the batteries that have
been inserted. If only one bar remains
you should replace the batteries soon.
13
in the soap refill
2
. The
1
shows
12
shows how
13
be-
13
shows the
14
GB/IE 19