Troubleshooting For Remote Wi-Fi Module - Extraflame NAVEL PLUS Manual

TRoUbleshooTIng foR ReMoTe WI-fI MoDUle

3. /WPS
Configuration
4.
Green LED - Power
5. Bluetooth
Blue LED -
6.
Orange LED - Station
7. Orange LED - Cloud
LED STATUS
Off
On
Power LED
(green)
Mostly on,
but off for
short periods
of time
Off
On
Bluetooth LED
(blue)
Mostly on,
but off for
short periods
of time
Off
Station LED
Flashing
(orange)
On
Off
Flashing
Cloud LED
(orange)
On
Mostly on,
but off for
short periods
of time
OTHER
The 4 LEDs turn on and off in sequence > The firmware is being updated or WPS pairing is active
•
reset button
DESCRIPTION
The module is not powered.
The module has started
successfully.
The module is
communicating with the
stove
No Bluetooth connection
made
Bluetooth device connected
Data transfer with Bluetooth
device
The module is not connected
to the home Wi-Fi network
The module is connecting to
the home Wi-Fi network
The module is connected to
the home Wi-Fi network
The module is not connected
to the cloud
The module is connecting to
the cloud
The module is connected to
the cloud
Data is being transferred
between cloud and module
POSSIBLE PROBLEM
ASSOCIATED
The module is not working.
-
-
The Bluetooth feature is
optional
-
No configuration was made
via App
If this situation persists for
several minutes, there is a
problem connecting to the
home Wi-Fi network
-
-
If this situation persists for
several minutes, it means that
the module cannot connect
to the Extraflame server.
-
ENGLISH
7 6 5 4 3
SOLUTION
Connect the supplied external
power supply.
-
-
Use the Total Control 3.0 APP
for Bluetooth features
-
Download the Total Control
3.0 App and perform the
configuration procedure
Make sure that the home
network is present and that its
signal is strong enough.
Should it be necessary to
reconfigure the product,
perform the reset procedure
-
-
Check that the home Wi-Fi
network has access to the
Internet.
Perform the reset procedure
and reconfigure the module,
taking care to use the correct
codes.
-
11