Bastuck L99TR6 Instrucciones De Montaje página 5

FITTING INSTRUCTION
| 13.05.2022 |
L99TR6 Anti-Roll-Bar
ANTI-ROLL BAR - LINK
Demounting and mounting
Demounting
1. Remove the Nyloc nut and plain washer securing the
anti-roll bar link to the lower wishbone bracket and pull
the link off the bracket.
2. Remove the Nyloc nut securing the lower end of the
anti-roll bar link to the anti-roll bar and remove the an-
ti-roll bar link, washers, rubber pieces and spacer sleeve
Mounting
3. Carry out operations 1 and 2 in reverse order.
ANTI-ROLL BAR - RUBBER PIECES
Demounting and mounting
Demounting
1. Remove the four Nyloc nuts and plain washers securing
the two U-bolts to the front cross member.
2. Remove the U-bolts and brackets.
3. Remove the rubber pieces
Mounting
4. Carry out operations 1-3 in reverse order.
BASTUCK & Co GmbH Tel.: +49 (0) 68 81 - 9 24 91 01
D-66822 Lebach Fax: +49 (0) 68 81 - 9 24 91 19
- 5 -
[email protected]
www.bastuck.com