STEP 1
Remove the deluxe sliding cover
and unscrew (2) screws to remove
the rack from the unit
(See Figure 1).
#2
#2
#2
STEP 2
Use (2) M6 x 6 mm Euro Screws if
using the system holes to secure
the deluxe sliding rack to the
cabinet (See Figure 2A).
Measure, mark, and pre-drill (2)
holes for the deluxe sliding rack,
if not using system holes. Use
(2) #8-32 x 1/2" wood screws to
secure the deluxe sliding rack to
the cabinet (See Figure 2B).
Note: Before pre-drilling, be sure
that your hole locations are level.
STEP 3
Secure the rack back onto the
slide using the (2) screws that were
removed in step 1 and replace the
deluxe sliding cover (See Figure 3).
STEP 4
Product is ready for use (See
Figure 4).
2
FIG. 1
FIG. 2A
FIG. 3
FIG. 4
Customer Service: 800-626-1126 | rev-a-shelf.com
Screw locations
FIG. 2B
