Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio housing • B) Radio brackets
A
Metra. The World's Best Kits.
®
Buick Encore 2013-2016
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted to match the factory finish
B
MetraOnline.com
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
95-3025B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: TBA
Antenna Adapter: 40-EU55
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" Socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 7/14/21 INST95-3025B
Tabla de contenido
Manuales relacionados para Metra 95-3025B
Resumen de contenidos para Metra 95-3025B
- Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3025B...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip, unplug and remove the dash panel surrounding the radio. (Figure A) 2. Remove (4) 9/32” screws securing the radio/climate control panel, then unplug and remove. (Figure B) 3. Remove (2) 9/32” screws securing the radio chassis, then unplug and remove. (Figure C) Continue to Kit Assembly (Figure A) (Figure B) (Figure C) 386.257.1187 MetraOnline.com... -
Página 3: Kit Assembly
KIT ASSEMBLY 1. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness and connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 3. Slide the radio/bracket assembly into (Figure A) the radio cavity in the sub dash. (Figure B) 4. Attach the radio housing using the factory screws. (Figure C) 5. Reassemble the dash in reverse order (Figure C) of disassembly. (Figure B) REV. 7/14/2021 INST95-3025B... - Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3025B...
- Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3025B...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche, desconecte y quite el panel del tablero que rodea el radio. (Figura A) 2. Quite los (4) tornillos de 9/32” que fijan el panel del radio/control del clima; posteriormente, desconecte y retire. (Figura B) 3. Quite los (2) tornillos de 9/32” que fijan el chasis del radio y posteriormente, desconecte y retírelo. -
Página 7: Ensamble Del Kit
(Figura A) 2. Localice el arnés de cableado de fábrica y el conector en el tablero y realice todas las conexiones necesarias al radio. Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de Axxess. Pruebe el radio para asegurarse de que funciona bien. - Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-3025B...