Nexigo GripCon Manual Del Usuario página 11

3.Press one of the Mapping Buttons(M1 / M2 / M3 /
M4) again, the LED Indicator will always be on to
indicate that the process was successful. One of the
Mapping Buttons(M1 / M2 / M3 / M4) now will have
the same functionality as the button you chose to
map to it.
Note: There is no mapping button combinations
function.
How to Remove the Mapped Buttons?
10
1.Remove the single mapped button:
Press and hold the - Button and one of the Map-
ping Buttons(M1 / M2 / M3 / M4) you want to
remove at the same time to enter removing the
mapped button mode. The LED Indicator will
always be on and be off briefly when the mapped
button is removed. The respective button will be
cleared of any programmed inputs.
2.Remove all mapped buttons:
Press and hold the + Button for five seconds, the
LED Indicator will be off when all mapped buttons
are removed.
US / 07