GAS LANTERN
Introduction
To get the most out of your new gas lantern,
please read through these instructions
before use. Please also save the instructions
in case you need to refer to them at a later
date.
The product contains:
1) Metal mesh
2) Decorative stones
3) Lantern
Model
Gas type
Gas consumption (g/h)
Supply pressure (bar)
Nominal heat output
(kW)
Nozzle size (mm)
Ignition method
The appliance can be used with all types
of 200 gas cartridges marked "Butane" that
comply with EN 417.
May only be used in well ventilated areas.
18
Special safety instructions
The lantern must only be used outdoors and
in well-ventilated areas!
The lantern must not be exposed to
precipitation and must be protected from
the elements during use and storage.
The lantern must be placed on a firm, level
surface before being lit.
This surface must be non-flammable, e.g.
flagstones, paving stones or packed earth.
There must be no combustible objects such
as grass, plants or rubbish under or near the
93541
lantern.
Butane
Keep the lantern at a safe distance from
51
combustible materials during use.
Direct pressure
NOTE! Keep children at a safe distance from
the lantern. Do not move the lantern whilst it
0.7
is lit or hot. Never use the lantern indoors.
WARNING! Keep children and pets at a safe
0.2
distance from the lantern.
Without piezo
The gas canister must be changed outside at
a safe distance from naked flames and other
sources of ignition.
If you discover a leak, turn off the gas supply
immediately and avoid naked flames and
other sources of ignition. Wait a few minutes
until the area has aired.