Create PATIO HEATER LAMP Manual Del Usuario página 9

3. Fix the heater on the base with 6 M6 * 10 mm screws with M6 wrench.
4. Rotate the heater to the angle you need, then lock it with 2 M4 * 12 mm screws.
M4*12mm screws
5. Gently pull the power cord out of the base as far as it will go. Fix the power cable under the
base with the 2 supplied M4 * 12 mm screws.
6. Fix the 2 pieces on the base with 4 M6* 10 mm screws, then drill two holes on the ground and
fix the heater with two blast bolts on the ground by tightening the screws with a wrench.
Base
Spanner
Piece
Expansion screw
M6*10mm screws
E NGLI SH
9