Better Homes and Gardens BHF1025004003 Instrucciones De Montaje página 28

Tools required (not included): Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8" drill bit.
33. Ask for assistance to position the assembled unit at the desired location against a wall. If necessary, adjust
the pre-attached floor levelers at the bottom of the Side Frames (D and E) and the Support Leg (I) to
correct the tilt and level the doors.
34. Follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the
tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
Assembly Instructions
WARNING
Children have died from furniture tip-over.
To reduce the risk of furniture tip-over:
ALWAYS install tip-over restraint provided.

FOR use with televisions weighing 70 lbs (31.8 kg) or less. Use with heavier

televisions may result in instability causing tip-over resulting in death or
serious injury.
NEVER allow children to stand, climb or hang on drawers, doors, or shelves.

NEVER open more than one drawer at a time.

Place heaviest items in the lowest drawers.

Use of tip-over restraints may only reduce, but not eliminate, the risk of
tip-over.
A
28