Steamfast SF-294 Guia Del Usuario página 9

SQUEEGEE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Squeegee with Fabric Nozzle as shown (FIGURE 6-A).
2. Insert tab on Squeegee into slot on face of Fabric Nozzle (FIGURE 6-B). Press in until secure.
3. To remove Squeegee, simply pull it off of Fabric Nozzle. It does not need to be released or
otherwise unlocked.
A
FABRIC STEAMER SETUP
FABRIC NOZZLE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Fabric Nozzle with Steam Nozzle as shown (FIGURE 7).
2. Slide Fabric Nozzle into Steam Nozzle, pressing  rmly until release button snaps through hole.
3. To remove Fabric Nozzle, press  rmly on release button while simultaneously pulling Fabric
Nozzle away from Steam Nozzle.
FABRIC
NOZZLE
RELEASE
BUTTON
FIGURE 6
STEAM
NOZZLE
HOLE
FIGURE 7
B
ENGLISH | 9