Device Description; Cleaning And Maintenance - UNIPRODO UNI HUMIDIFIER 04 Manual De Instrucciones

EN
c) The device is not a toy. Children must be
supervised to ensure that they do not play with
the device.
d) Do not put your hands or other items inside the
device while it is in use!
2.4. SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does
not function properly (does not switch the device
on and off). Devices which cannot be switched on
and off using the ON/OFF switch are hazardous,
should not be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning
and maintenance. Such a preventive measure
reduces the risk of accidental activation.
c) When not in use, store in a safe place, away from
children and people not familiar with the device
who have not read the user manual. The device
may pose a hazard in the hands of inexperienced
users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements
and for any other conditions which may impact
the safe operation of the device. If damage is
discovered, hand over the device for repair before
use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried
out by qualified persons, only using original spare
parts. This will ensure safe use.
g) Do not move, adjust or rotate the device in the
course of work.
h) Do not leave this appliance unattended while it is
in use.
i) Clean the device regularly to prevent stubborn
grime from accumulating.
j) Do not cover the air intake and outlet.
k) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
l) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
m) Keep the device away from sources of fire and
heat.
n) The device may only be operated in an upright
position. Avoid tilting the device to prevent water
leakages.
o) It is not recommended to pour essential oils into
the water tank.
p) Do not start the device with an empty water tank.
q) The device produces steam. Do not put the device
under a cupboard or near other devices.
ATTENTION! Despite the safe design of the
device and its protective features, and despite
the use of additional elements protecting the
operator, there is still a slight risk of accident or
injury when using the device. Stay alert and use
common sense when using the device.
8
3. USE GUIDELINES
The device is intended for air humidification in rooms with
insufficient humidity.
The product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

5
1
6
7
2
8
3
9
10
4
1. Mist outlet
2. Air inlet
3. Fog sensor
4. Air outlet
5. Water tank lid
6. Water tank
7. Water level window
8. Water level sensor
9. Diode
10. ON/OFF buton
4
3
2
1
1. ON/OFF button
2. LED 1 – low efficiency
3. LED 2 – medium efficiency
4. LED 3 – high efficiency
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher
than 40°C and the relative humidity should be less than
85%. Ensure good ventilation in the room in which the
device is being used. There should be at least 30 cm
distance between each side of the device and the wall or
other objects. There must be a minimum of 50 cm free
space above the device. Keep the product away from
hot surfaces. The device should always be used when
positioned on an even, stable, clean, fireproof and dry
surface, and be out of the reach of children and persons
with limited mental and sensory functions. Position the
device such that you always have access to the power
plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details on the product label.
3.3. DEVICE USE
Before starting the device, refill the water tank:
1. Remove the water tank lid.
2. Pour in the correct amount of water. Be careful
not to exceed the maximum water level!
3. Place the lid back on the tank.
* If necessary, the water tank can be removed
from the base to refill the water level.
TURNING THE DEVICE ON:
1. Connect the device to the power supply. The
operation LED will turn white for approximately 1
second and the device will automatically enter a
standby mode.
2. Press the ON/OFF button to operate the device
in its lowest operating mode (low capacity). LED 1
will turn green.
3. Press the ON/OFF button again to operate the
device in its medium operating mode (medium
capacity). LEDs 1 and 2 will turn green.
4. Press the ON/OFF button once more to operate
the device at its maximum air humidification
efficiency. All the LEDs will be green.
5. Pressing the ON/OFF button for the fourth time
means that the device goes into a standby mode.
All the LEDs will turn off.
6. To turn the water level indicator on or off, hold the
ON/OFF button for 3 seconds.
7. To turn the device off, disconnect it from the
power supply.
CAUTION! Empty the water tank after each use
and let it dry! Leaving water in the tank may cause
bacterial growth.
WATER TANK:
1. The water tank has a capacity of 4400 ml.
2. During operation, the device automatically draws
water from the tank and generates a mist.
3. If there is not enough water in the tank or the
water runs out, the device will stop working and
the LED will turn red. If the device is to continue
operation, the water in the tank must be refilled.
4. If the water tank is pulled out while the device
is operating, the device will stop working and
generate a mist. When you put the tank back into
the base, the device will restart.
5. CAUTION! Do not tilt the device when the tank is
full.
9 EN

3.4. CLEANING AND MAINTENANCE

a) Always unplug the device before cleaning it.
b) Use only non-corrosive cleaners to clean the
surface.
c) After cleaning the device, all parts should be dried
completely before using it again.
d) Store the unit in a dry, cool place, free from
moisture and direct exposure to sunlight.
e) Do not spray the device with a water jet or
submerge it in water.
f) The device must be regularly inspected to check
its technical efficiency and spot any damage.
g) Use a soft, damp cloth for cleaning.
h) Do not use sharp and/or metal objects for
cleaning (e.g. a wire brush or a metal spatula)
because they may damage the surface material of
the appliance.
i) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils
or other chemical substances because it may
damage the device.
j) Clean the water tank regularly.
k) If the device is not used for a long time, make sure
that the water tank is empty and that the device is
dry.
l) When not in use, store the device covered, e.g. in
a bag or cardboard box.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste
systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on
the product, instruction manual and packaging. The
plastics used to construct the device can be recycled
in accordance with their markings. By choosing to
recycle you are making a significant contribution to the
protection of our environment.
Contact local authorities for information on your local
recycling facility.
TROUBLESHOOTING
Problem Possible reason Solution
Connect the plug
The plug is not
to the power
connected
The device is
supply
not working
Water level in the
Fill the water tank
tank is too low
Insufficient water Fill the water
in the tank. tank.
The device
does not The mist sensor Clean the mist
generate a is dirty sensor
mist or does it
Place the lid
wrong
The water tank lid
correctly on the
is moved
water tank