Portable Pumping Kits
Features
Pumps fresh and sea water.
●
Wash down for cars, RVs, anchors and boats.
●
Deck shower.
●
Bilge or storm water emptying.
●
Diesel refuelling and transfer (models iL500PK and iL280PK only).
●
Garden watering.
●
Container filling and emptying.
●
Instructions
Immerse the complete pump in liquid. Connect the battery clips to the
battery terminals (+) positive to (+) positive and (-) negative to (-) negative
(if powering from a car or boat battery do not use with engine running). The
pump will deliver immediately. Adjust spray nozzle to obtain required flow.
For an in-line installation unclip the filter to expose the inlet nozzle. Connect a
length of hose between the tank and nozzle. The pump must be fitted below
the tank.
Avoid dry running for long periods.
●
sterilize regularly.
Store away from excessive heat and direct sunlight to
●
avoid external damage.
If the pump fails to perform, check for blockages
●
(including filter), leaks and correct hose & electrical connections.
Specifications
Model
iL500
Part No.:
iL500PK
iL500PK-24
Pump Type:
Centrifugal submersible / in-line portable pumping kit
Current:
12V
24V
Head:
32ft
Flow rate:
500 gph
(1920 lph)
Rating:
Continuous*
Outlets
3
/
(19mm)
4
(id hose):
Hose:
13ft
(4m)
pvc / nitrile hose
Pressure:
14psi
Pump Body:
POM
Pump Length:
6.5"
Pump Diameter:
1.5"
Cable Length:
13ft
Weight:
2.2lbs
Liquid:
Fresh & Sea Water / Diesel
Operating
Temp:
* Continuous Duty
- Should not be run dry for long periods of time.
^ Intermittent Duty - Should not be run for more than 20mins and rested
for equal time.
For drinking water applications
●
●
Plus
Kit
iL280
Plus
Kit
iL200 Kit
iL280PK
iL280PK-24
12V
12V
(6amp)
(4.5amp)
24V
(3amp)
(2.5amp)
32ft
25ft
(9.7m)
(9.7m)
280 gph
200 gph
(1080 lph)
(760 lph)
Continuous*
Intermittent^
1
/
(13mm)
3
/
2
8
&
1
lay flat
13ft
lay flat
9ft
(4m)
(3m)
pvc / nitrile hose food quality hose
14psi
14psi
(0.96bar)
(0.96bar)
POM
6.5"
5.1"
(165mm)
(165mm)
1.5"
1.4"
(38mm)
(38mm)
13ft
(4m)
(4m)
1.8lbs
1.4lbs
(1kg)
(800g)
Fresh & Sea
Diesel to 104°F (
Water to
40°C)
Water to 176°F (
140°F
80°C)
iL200K
(2.8amp)
(7.6m)
(10mm)
/
(13mm)
2
lay flat
(0.96bar)
HIP
(130mm)
(36mm)
3ft
(1m)
(650g)
Water
(60°C)