Beyerdynamic Xelento wireless Instrucciones De Uso página 18

18/30
Pairing
9 Xelento wireless is switched off.
1. Press and hold the on/off button for 6 seconds (
mode via Bluetooth®.
Status LED slowly flashes alternately blue and red.
2. Activate the Bluetooth® function on the playback device and search
for new devices if necessary.
3. In the Bluetooth® menu of the playback device, in the pairing list,
select "Xelento wireless (2nd gen.)" from the available devices to
connect the two devices.
After a successful connection, the status LED briefly flashes blue
every 7 sec. Each time the device is switched on again, the devices
will connect as soon as they are within range of each other.
If the Bluetooth®connection has been lost, the LED briefly flashes blue every 3 sec.
Performing Google Fast Pair
9 Xelento wireless is switched off.
1. Press and hold the on/off button for 6 seconds (
mode via Bluetooth®.
Status LED slowly flashes alternately blue and red.
2. In pairing mode, place Xelento wireless near a Fast-Pair-enabled
smartphone.
3. Tap on the smartphone to establish the connection.
Deleting the pairing list
If there are already several playback devices in the list of your Xelento wireless, and it
cannot be paired with another new playback device, the list is full and should be cleared
so that the new playback device can be added.
9 Xelento wireless is switched off.
► Press and hold the on/off button for >10 seconds (
The list of already paired Bluetooth® devices (maximum 8) is deleted,
and the in-ear headphones switch to Bluetooth® connection mode.
) to start pairing
) to start pairing
).
Operation