Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Charge Your E-Bike
The battery can be charged off the bike. To remove the battery, turn
the key to the UNLOCK position.
(see the previous remove battery section for details),
Then carefully pull the battery up until the battery
detaches from the receptacle.
Remove the rubber cover on the charging port on the opposite side
of the battery from the key switch. Connect the DC output plug from
the charger to the charging port on the side of the battery.
Plug the charger into a power outlet, charging should initiate and
will be indicated by the LED charge status lights on the charger
turning red. Once fully charged, the charging indicator light turning
green. Unplug the charger from the wall outlet first and then
remove the charger output plug from the battery charging port.
14
Display and Setting
Dear users, please read this operation manual carefully before you use the S866 LCD meter. The manual will guide
you to use the instrument correctly to realize various vehicle control and vehicle display functions.
4
1
2
3
12
I. Functions and display
1 Operation button UP key
2 Operation button SW key
3 Action button key
4 Real-time cycling speed (metric)
Real-time cycling speed (metric)
Single ride average speed display
Single maximum ride speed display
5 Assist gear switch
6 Lights on sign
7 Motor fault indication
5
6
7
8
9
11
10
8 Brake sign
9 Fault indication (not used)
10 BMS battery percentage display (this
feature has been removed)
11 5-segment battery indication
12 Miles ridden (metric)
Miles ridden (imperial)
Total miles ridden display
Single miles ridden display
Real-time battery voltage display
Single ride time display
15
Tabla de contenido
