Getting Started - oneConcept CDC 100 Manual De Instrucciones

GETTING STARTED

Power supply
This CD player is powered by two 1.5 V batteries (type LR6). Batteries are not
included in the scope of delivery!
Inserting the batteries
1. Open the battery compartment cover on the underside of the housing.
2. Place two batteries in the battery compartment. Note the polarity marking
on the battery compartment cover.
3. Close the battery compartment.
Note: Make sure you insert the batteries the right way round. Incorrect
polarity may damage the unit and void the warranty.
Notes on handling batteries
1. There is a risk of explosion if the wrong type of battery is inserted. Always
insert the correct battery type.
2. Do not mix old batteries with new ones.
3. Do not mix alkaline with zinc-carbon batteries or rechargeable batteries.
4. Remove the batteries if the device will not be used for a long period of
time. Old or leaking batteries can damage the unit and void the warranty.
5. Do not attempt to charge batteries that are not rechargeable. They can
overheat and burst. Follow the battery manufacturer's instructions.
6. Do not throw batteries into a fire. The batteries could leak or explode.
Use of a USB power supply unit (not included in the scope of delivery)
1. Before connecting the mains adapter to the power supply, make sure that
the rated voltage of the unit matches the voltage of the power supply in
the house.
2. Connect the power supply unit to a wall socket.
3. Insert the mains plug into the CD player.
Note: When the mains plug is connected, the power supply from the
batteries is automatically disconnected and the CD player is now powered
from the batteries.
EN
21